Stabilisation Props
They are also known by the name “stabilization props,” and they work by pulling and pushing the formworks into place when they are laid out on the site.
These push-pull diagonal props consist of two telescopically slidable pipes. A threaded ring nut and a pin fitted into the slots of the inner pipe
Push-pull props come in three models, type L, type N & type H. Depending on the guaranteed maximum capacity given as:
Adjustment carried out using a double handle sleeve.
These props’ adjustment carried out using a single ring nut.
It’s adjustment are carried out using two ring nuts.
Do you want to download the summary table of push-pull props in PDF format?
This model comes in two variants: Type L1 push-pull and type L2 push-pull
Type L1 push-pull
» Type L1 push-pull props are lightweight props that are typically coated in order to maximise cost-benefit analysis given that they are used to prop up light things.
»
Pipe protection: RAL 3009 red hot-dip coating with minimum durability in compliance with the ASTM D 2247-87 standard tests in a humidostatic chamber: Inner pipe diameter 48 x 1.80 mm; Outer pipe diameter 56 x 1.65 mm.
Type L2 push-pull
» Type L2 push-pull prop: it is available in galvanised and hot-dip coated versions with greater thicknesses. (hot or cold dip galvanisation).
» Pipe protection: hot-dip galvanization in compliance with the UNI EN ISO 1461 standard, with a guaranteed minimum thickness of 55 microns: Inner pipe diameter 48 x 3.00 mm; Outer pipe diameter 57 x 2.5 mm.
Plumbing is done in type N models using a single ring nut that adjusts the length of the prop based on the direction of rotation. Extension adjustable between 1.80 and 5.00 m depending on the prop model. Pulling guaranteed at 38.00 kN regardless of the use extension. Anti-shearing system: the greater length of the inner pipe. Plates that can be articulated mounted on the two ends. Hot-dip galvanization in compliance with the UNI EN ISO 1461 standard. Inner pipe diameter 48 x 3.00 mm; Outer pipe diameter 60 x 2.50 mm
In type H models, plumbing is accomplished using two spherical cast iron ring nuts that can be adjusted in length. This model comes in two variations H1 and H2.
Type H1 push-pull
» Pulling guaranteed at 38.00 kN; Inner pipe diameter 48 x 3.00 mm; Inner pipe diameter 48 x 3.00 mm
Type H2 push-pull
» Pulling guaranteed at 38.00/41.90 kN; Inner pipe diameter 63x 2.60 mm; Outer pipe diameter 76 x 2.60 mm
» Would you like to view the full GBM props catalogue?
» Our shoring prop specifications are also available in data sheet which includes: maximum/minimum extension, inner/outer tube, weight, compression and more.
These are classified according to maximum extension and capacity. Below are their technical features.
Assisted by
Head Office 3 Dazln Drive
Melton VIC 3337, Australia
Head Office: +64 4133 59856
IRAQ- Baghdad Office: +964 7722 555 444